Eclectic 230034 Eclectic E-6000 Industrial Viscosity Multi-Purpose Adhesives, 109.4 ML

Self-leveling formula. An indispensable maintenance tool, E6000 allows the kind of permanent repair and maintenance of equipment that may have been too expensive or difficult in the past. E6000 provides adhesion strength and versatility not found in silicones and rubber cements. Its strength in adhering metals, glass, rubber and plastics makes it a universal vehicle maintenance and repair solution.

Highlights:

• Multi-Purpose
• Size: 109.4 ML
• Paintable
• Waterproof
• Flexible
• Non-flammable
• Can be used as a potting material in electrical and computer applications

Advantages:

• Flammability: NONE, this product is non-flammable when cured
• Flexible: Does not become brittle in cold weather; can bond items subject to vibration
• Chemical resistant: Safe for applications exposed to dilute acids and dilute caustics
• Vibration: Great for bonding substrates subject to high-wear
• Waterproof: Can be submerged in fresh and salt water after complete cure
• Paintable: Paint to match surrounding area or make UV-resistant

Applications:

Plant & Fleet Maintenance:

• Repair rubber dock bumpers
• Seal plastic containers
• Repair stripped threads in wood
• Seal PVC, copper and galvanized pipes
• Adhere metal to metal
• Repair cement brick or cinder block cracks
• Seal and repair cracked or broken glass
• Coat and seal electrical connections and battery terminals against corrosion
• Seal windshields against moisture
• Mend rubber floor mats and weather-stripping

How To Use:

E6000 Series of Industrial Strength Adhesives:

• Use in a well-ventilated area only. Surface should be clean, dry and free from dirt. Roughen surface before use. Best when used between 70 °F (21°C) and 85 °F (29 °C)
• Apply E6000 directly to the area to be repaired. For maximum strength, allow bond to dry for 24-72 hours. Cure time increases with lower temperatures and decreases with higher temperatures. Set on low and do not hold directly on E6000
• Clean uncured adhesive with acetone or naphtha. Cured material may be removed by cutting and scraping
• E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics